Equipment Usage
Used for one-time stamping of locking holes, hinge holes, installation holes, and corner cutting holes for various steel and stainless steel door frames, front and rear door panels, such as anti-theft doors, fire doors, medical doors, and purification doors.
Principles of homework
After the machine is started up, the program is preset according to the hole position combination requirements, and then the memorial archway is adjusted according to the hole position spacing requirements. After the preset is completed, the door frame/door panel is loaded. After the fixation is completed, the foot stamping is performed to realize the one-time molding of all hole positions/cutting angles.
Product features
● Integrated stamping can complete all hole positions and section forming in one go, with fast production efficiency;
● The bed adopts an independent bed structure that can be adjusted as needed;
● Independent punching, independent control, on-demand combination, wide applicability;
technical parameter
|
technical parameter |
Reference indicators |
|
Maximum output force of the main oil cylinder |
150KN |
|
Rated pressure value of hydraulic system |
25MPA |
|
Stamping station |
（2-7）Workstation, customized according to customer needs |
|
Workbench size |
Customized according to mold size |
|
Total power |
7.5/11kw，Depending on the workstation |
Detail display
1. Host rack: The main structure of the device, which is the backbone of the device
● The bed adopts an independent memorial archway structure, which is connected with the underframe through the screw guide rail, and can adjust the spacing as required (with servo motor, the spacing can also be accurately adjusted by numerical control);
● The memorial archway is fixed by screws, which is easy to operate and not easy to slide;
2. Stamping device: power output for stamping
● The stamping method adopts hydraulic pressure, with greater force and no burrs on the stamping surface;
● Adopting an independent workstation and independent oil cylinder structure, each workstation can be independently controlled and can be combined for stamping as needed. At the same time, the independent oil cylinder ensures that if one oil cylinder is damaged in the future, it will not affect the use of other workstations;
● Each hydraulic component adopts imported or domestic first tier brand products, which are durable and long-lasting;
3. Punching mold: A mold for forming holes, which can be customized according to needs
● The punching molds are all made of Cr12Mov material, which is quenched and then processed by wire cutting, making them durable and long-lasting;
● The punching mold is easy to disassemble and assemble, making it convenient for subsequent on-demand mold replacement;
4. Electronic control system: The device control system is the brain of the device
● Adopting a PLC control system, the stamping station can be customized. After setting up, it can be achieved through foot or button pressing, achieving integrated stamping with flexible operation and low skill requirements for workers;
Random data
|
Number |
name |
quantity |
Remarks |
|
1 |
Shipping List |
1 copy |
|
|
2 |
Acceptance report |
1 copy |
|
|
3 |
User manual |
1 set |
|
|
4 |
Electrical schematic diagram |
1 set |
|
The cooperation that the user should provide
1. Power supply: 380V, 50HZ, voltage fluctuation range from -5% to+10%; When there is a significant fluctuation in voltage, users must be equipped with a voltage regulator, otherwise it will cause low-voltage electrical appliances to be in an abnormal working state, reduce or damage the service life of electrical components, scrap processed products, motor alarm causing shutdown, computer hard disk damage, and other problems.
WeChat public account
